Facile preparation and synergy study of DMC/ZnGA composite catalyst for the synthesis of oligo (propylene‐carbonate) diols

To overcome the weak carbon dioxide (CO₂) conversion ability of Zn‐Co double metal cyanide (DMC) catalyst, zinc glutarate (ZnGA) catalyst was introduced into the DMC catalytic system and applied for the synthesis of oligo (propylene‐carbonate) diols. The DMC/ZnGA composite catalyst (mass ratio = 10:1) exhibited an excellent synergistic effect which had enhanced CO₂ activation ability, high yield and good selectivity. In copolymerization process, ZnGA catalyst not only provided activated CO₂ for DMC catalyst, but also transferred the propagating chain with more alternating structures to DMC catalyst. Both of the two effects increased the carbonate content in the final products. Overall, DMC catalyst dedicated to the polymer chain growth, while the increased CO₂ conversion mainly attributed to ZnGA catalyst. Oligo (propylene‐carbonate) diols with carbonate unit content of 45.1 mol%, Mn of 1228 g/mol, W_PC of 4.3 wt% and high yield of 1689 g/g _cat was obtained.     

Mesostructure organic‐inorganic hybrid ionic liquids based on heteropoly acids: Effect of linkage on the molecular structure and catalytic activity

The new inorganic–organic hybrids based on SO₃H‐functionalized ionic liquids (ILs) and Keggin‐type heteropoly acids (H₃PW₁₂O₄₀, H₃PMo₁₂O₄₀, and H₄SiW₁₂O₄₀; HPAs) are prepared and characterized by FT‐IR, NMR, XRD, CV, SEM/EDX, ICP‐OES, BJH and UV. Different molecular structures according to the different inorganic part were also proved. Potentiometric titration showed a good relationship between catalytic activity and acidity of the catalysts. Electrochemical aspects showed electron transfer ability of the compounds. For understanding catalytic activities of the HPA‐IL hybrids in N‐formylation reaction, effect of catalyst composition, substrate, and reaction conditions were studied. The best SO₃H‐functionalized ionic liquid catalyst was readily recovered and reused for four runs. Easy preparation of the catalyst, simple and easy work‐up, mild reaction conditions, low cost, excellent yields and short reaction times are the key features of this work.     

Direct calculation of time varying Aharonov-Bohm effect

The Aharonov-Bohm effect (ABE) for steady magnetic fields is a well known phenomenon. However, if the current in the infinite solenoid that creates the magnetic field is time-dependent, that is in the presence of both magnetic and electric fields, there is no agreement whether the effect would be present. In this note, we try to investigate time varying ABE by a direct calculation in a set-up with a weak time dependent magnetic field. We find that the electric field arising out of the time-varying magnetic field in the path of the electrons does not enter the action integral but only changes the path of the electron from the source to the slits and then on to the detector. We find a frequency dependent AB phase shift. At low frequencies the result smoothly approaches the one for a constant field as the frequency tends towards zero. On the other hand, for high frequencies such that the AB-phase induced in the path of the wave packet oscillates rapidly, the net effect will be very small which is borne out by our results.     

Supported dual‐acidic 1,3‐disulfoimidazolium chlorozincate@HZSM‐5 as a promising heterogeneous catalyst for synthesis of indole derivatives

HZSM‐5‐supported Brönsted and Lewis acidic ionic solid 1,3‐disulfoimidazolium chlorozincate materials ([dsim]₂[ZnCl₄]@HZSM‐5) were synthesized with various ratios (3, 6, 9, 17 and 50% w/w). The heterogeneous materials were characterized via a variety of spectroscopic techniques. Dual acidity of these materials was determined using specified techniques. These acidic solids were examined as stable heterogeneous catalysts for the Fischer indole reaction of equimolar amounts of phenylhydrazine hydrochloride and various aliphatic or aromatic ketones at 80–90°C in neat condition to produce substituted indole derivatives. The efficient 17% ionic salt‐loaded HZSM‐5 composite was easily reused for ten consecutive cycles with a slight loss of its activity. The recycled catalyst was further analysed using powder X‐ray diffraction and inductively coupled plasma optical emission spectrometric techniques.     

Multiplicity results of nonlinear fractional magnetic Schrödinger equation with steep potential

In this article, we prove the existence and multiplicity of non-trivial solutions for an indefinite fractional elliptic equation with magnetic field and concave–convex nonlinearities. Our multiplicity results are based on studying the decomposition of the Nehari manifold.     

磷酸化调控泛素单体与Rad23A/Ubiquilin-1中泛素结合域互作的检测

泛素（ubiquitin，Ub）是一种广泛存在、高度保守的信号蛋白质，它能够特异性识别成千上万种靶蛋白，以非共价方式行使不同的功能，其中包含蛋白质降解．Ubiquilin-1（Ubql-1）和Rad23A作为两种蛋白降解的转运因子，都包含有与泛素结合的结构域，被称为泛素结合域（ubiquitin-associated domain，UBA）．2014年，泛素S65位磷酸化修饰的特异性激酶PINK1被发现，磷酸化使泛素在溶液中呈现舒展态与收缩态两种互相转换的构象．本文通过核磁共振（nuclear magnetic resonance，NMR）技术对UBA和磷酸化泛素之间的相互作用进行检测，观测磷酸化对UBA和泛素结合的影响．实验结果表明Rad23A-UBA2与Ubql-1 UBA都特异性的与磷酸化泛素的舒展态相互作用，但是磷酸化未改变泛素与UBA之间的亲和力．值得注意的是与Ubql-1 UBA相互作用时，磷酸化促进了泛素收缩态向舒展态的转换．     

基于回波平移序列的快速三维磁共振温度成像方法

高强度聚焦超声（HIFU）是一种无创的热消融疗法，为保证其安全性和有效性，需要一种精度高、速度快的测温方法在其治疗过程中对温度进行监控.基于质子共振频率位移（PRFS）的磁共振温度成像（MRT）对温度具有较高的灵敏度，且与温度具有良好的线性关系，因此常被用于引导HIFU治疗.然而在实际应用中，HIFU治疗的最大隐患在于可能造成表皮灼伤，并且灼伤区域可能与焦点区域相隔较远.因此MRT的监控范围十分重要.本文基于三维回波平移成像序列，结合可控混叠的空间并行成像技术，实现了时间分辨率为3 s的快速三维温度成像.为了验证该方法的精度，本文首先设计了仿体降温实验，利用光纤温度计验证回波平移序列测温的准确度和精确度.然后在室温条件下扫描离体猪肉组织，对比加速前后的MRT的测温精确度.在HIFU加热条件下扫描离体猪肉组织，对比加速前后的MRT的测温准确度.结果显示，本文提出的方法可以在3 s内完成三维温度精准测量，对于HIFU治疗的安全监控具有重要意义.     

Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

Microwave‐associate synthesis of Co3O4 nanoparticles as an effcient nanocatalyst for the synthesis of arylidene barbituric and Meldrum's acid derivatives in green media

In this study, Co₃O₄ nanocatalysts were constructed in environmentally appropriate conditions using controlled, effective, and facile microwave method. The final nanostructures were characterized by SEM, XRD, and TEM analyses. The products had a small size distribution, homogeneous morphology, and crystallographic structures associated with the formation of Co₃O₄ nanostructures. Moreover, EDS mapping analysis confirmed the existence of Co and O elements in the final structure, and the magnetic properties of the samples were investigated by VSM. The application of this nanostructure in a catalytic process was further examined, and the results suggested that it could be used as a novel candidate for the synthesis of arylidene barbituric and Meldrum^,s acid through Knoevenagel condensation of aldehydes by barbituric and Meldrum^,s acid in aqueous media. The high yield of these nanocatalysts would be justified by the nature of the nanostructure as well as the experimental procedure developed in this study, which affected the physicochemical features of the products.     

A new tricrystalline triblock terpolymer by combining polyhomologation and ring‐opening polymerization. synthesis and thermal properties

New tricrystalline triblock terpolymers, polyethylene‐block‐poly(ε‐caprolactone)‐block‐poly(L‐lactide) (PE‐b‐PCL‐b‐PLLA), were synthesized by ROP of ε‐caprolactone (CL) and L‐lactide (LLA) from linear ω‐hydroxyl polyethylene (PE‐OH) macroinitiators. The linear PE‐OH macroinitiators were prepared by C1 polymerization of methylsulfoxonium methylide (polyhomologation). Tin(II) 2‐ethylhexanoate was used as the catalyst for the sequential ROP of CL and LLA in one‐pot polymerization at 85 °C in toluene (PE‐OH macroinitiators are soluble in toluene at 80 °C). ¹H NMR spectra confirmed the formation of PE‐b‐PCL‐b‐PLLA triblock terpolymers through the appearance of the characteristic proton peaks of each block. GPC traces showed the increase in the number average molecular weight from PE‐OH macroinitiator to PE‐b‐PCL, and PE‐b‐PCL‐b‐PLLA corroborating the successful synthesis. The existence of three crystalline blocks was proved by DSC and XRD spectroscopy. © 2019 The Authors. Journal of Polymer Science Part A: Polymer Chemistry published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2450–2456